Introduce how to standardize the use of metal laser cutting machines

　　In fact, according to the metal laser cutting machine production and processing industry's expanded and open product application strategy, if you want to make full use of the metal laser cutting machine's role as much as possible, increase production capacity and high efficiency, the application enterprise can consider the following aspects Perform verification enhancements:

　　1. Check the focus position, the focus position will seriously affect the fiber laser cutting degree, especially the spot aperture of the focus point. The focus spot aperture should be as small as possible to form a narrow slit.

　　2. Set an appropriate distance between the nozzle and the product. A long distance will also cause excess mechanical kinetic energy consumption. Too close will cause the lens to cause obvious return pressure and weaken the simple harmonic motion of the sputtered fiber laser cutting chemical substances. The removal ability will have bad influence on the quality of fiber laser cutting, and the suitable distance is 0.8mm. In addition, it is necessary to ensure that the height of the nozzle and the product workpiece are consistent during operation.

　　3. Check the breaking speed, which is directly proportional to the power of the fiber optic metal laser cutting machine. In addition, the specifications behind the laser condenser have a particularly large impact on the quality of fiber laser cutting.

　　4. The preferred assisting gas is preferably compressed air or inert gas. If the thickness of the raw material is increased or the cutting speed is slow, the tire pressure should be reduced as much as possible, and fiber laser cutting with a lower pressure can prevent the edge from blooming.

　　5. Check the power of the laser generator. The laser generator is the core component of the metal material laser cutting machine, and the power will decrease after long-term use. In addition, the characteristics and thickness of the original plastic produced may also affect the power of the metal laser cutting machine . It is also necessary to clarify with the company that the above factors that are harmful to the laser cutting machine are eliminated. , Daily machine operation also needs to pay attention to a major problem of fiber laser cutting fume and dust removal. In the case of fiber laser cutting, the laser cutting machine will cause more smoke and dust due to continuous high temperature ablation, which may cause air pollution to the prefabricated components. If the fiber laser cutting smoke and dust are not treated, it is likely to damage the laser cutting machine Age and Fiber Laser Cutting Characteristics. So the difficulty is, how to efficiently remove dust from metal laser cutting machines? Here is a better dust removal solution for fiber laser cutting that is recognized in a certain field for everyone:

　　Combined with the operation mode of metal laser cutting machine and the characteristics of fiber laser cutting smoke and dust, the configuration includes high-efficiency centrifugal fan, high-quality nano-material filtration system, automatic pulse lock air dust removal system, and fiber laser with the following unusual flow channel design scheme. Cutting systematic dust removal solution.

　　With this solution, the efficiency of dust filtration and cleaning can reach 99%. The design of the horizontal filter cartridge is convenient and quick to disassemble, the structure is compact, the management solution is easy to maintain, and the operation is low-noise. program program.